Shopbox

Do you have a new Epson T88ii printer? Here you have an easy guide to get it set up to run with Shopbox. First we need to prepare the printer. This is how it is done:

Insert an "Ethernet cable" that runs from your printer to your network device

Insert a receipt roll into the printer. If you uncertain how check out the image below

1. Connect the printer to power. 
2. Insert an "Ethernet cable" that runs from your printer to your network device
3. Insert a receipt roll into the printer. If you uncertain how check out the image below

Now we can start downloading drivers for printer. You can download the "Epson net config" program <a href="https://1drv.ms/u/s!AuUBnp9Iyo_cgYApyzn5Su8mJAlPAQ?e=ik2dW7" target="_blank" rel="nofollow noopener noreferrer">here</a>. After installation, do the following:

Under the field "TCP / IP" select "Basic" Click "Automatic" at the top for the printer to find an IP address 

Click on the white printer icon on the top black bar 

Click the reload button (semicircle ending in an arrow) 

Click "Yes" to connect and make a test print

1. Open "Epson net-config"
2. Let the program search for your printer 
3. Double-click the printer 
4. Let it connect to the printer 
5. Under the field "TCP / IP" select "Basic" Click "Automatic" at the top for the printer to find an IP address 
6. Click "Transmit" at the bottom 
7. Click "OK" 
8. Click "Refresh" to see if it's online 
9. Open Shopbox 
10. Click on the white printer icon on the top black bar 
11. Click on "Main Printer" 
12. Click the reload button (semicircle ending in an arrow) 
13. Click "Click here to select printer" 
14. Select TM-T88ii (XX-XX-XX-XX-XX-XX) 
15. Click "Save" 
16. Click "Yes" to connect and make a test print